Quick Installation Guide Applicable model:
2-port USB “KVM-in-the-Cable” w/ Audio&Mic
Rev. 1.2 Copyright© All rights reserved. Nov 2004
KVM Switching Client Software for Windows
User-definable Hotkeys
Independent/Simultaneous Audio&PC Switching
Autoscan Delay Time Programmable
2-port USB “KVM-in-the-Cable” w/ Audio&Mic
2 x built-in 1.5 M KVM Audio/Mic Combo Cables
Quick Installation Guide
Thank you for purchasing the 2-port USB “KVM-in-the-Cable”
Switch w/ Audio&Mic Switching! With our highly reliable and
quality product, user can enjoy countless benefits from using it.
2-port USB “KVM-in-the-Cable” Switch
w/ Audio&Mic
Introduction
The 2-port USB “KVM-in-the-Cable” Switch w/ Audio&Mic
provides 2 sets of built-in USB KVM combo cables to save you
cabling troubles. And its Audio and Microphone switching function
offers you uninterrupted multimedia experience. It allows you to
access, control, boot and reboot multiple USB-enabled
multimedia computers using only one USB keyboard, mouse,
monitor and a speaker set and microphone.
For PCs running Windows operating systems, it also provides an
innovative and easy-to-use KVM Switcher Software -- a small
windows client application to facilitate your KVM switching
operations such as PC selection and hotkey sequence
programming, autoscanning, autoscan delay time programming,
independent/simultaneous audio&PC Switching, etc.
This USB “KVM-in-the-Cable” Switch offers USB 1.1 interface
technology for Plug-and-Play and hot-pluggability. Users can
enjoy maximum flexibility and convenience with its compact and
one-piece design.
Out-of-Box Installation
Take the Companion Diskette/CDROM and the KVM Switch
out of the box and follow the steps below for installation….
Step 1. Insert the companion CD ROM into your CD drive, and
the installer program, USBKVMIn.exe, will be run (or you
can find it with the Explorer and double-click its software
icon to start installation). Complete the
software installation on each of the
computers to be connected to the
KVM Switch.
After the installation is completed, you will see a KVM
Switcher icon on the system tray of your window
desktop. Just right click to evoke the operation menu
and double-click to evoke configuration box. For
operation details of the KVM Switcher software, please
refer to the Operation Quick Reference.
: No live connection detected
: Current active PC channel is on port 1
: Current active PC channel is on port 2
The KVM Switcher Software supports only the Windows platforms.
For other platforms such as Linux or MacOS, you can still use the
keyboard hotkey - ScrLk + ScrLK - to switch PC.
Step 2. Connect the shared USB keyboard, mouse, monitor,
speaker/headphone and microphone each to its port on
your KVM Switch.
Step 3. Connect a set of the built-in KVM/Audio&Mic cables to a
computer’s connectors. Connect another set of cables to
another computer. Now you can operate the KVM
Switch immediately.
Some older computers with USB interface might need to manually
enable the USB option in the BIOS settings before you can use any
USB devices. If your USB interface does not work, please check the
USB option status in the BIOS.
If you use Windows 95/98/SE and has not yet installed a USB mouse
on your computer, there might be an error message telling you that
mouse is not detected and prompting you to decide whether to
ignore the same message in the future, and yet you found there is no
mouse movement to disable this message….So it is suggested that
you should installed your USB mouse on your computer first, before
connected it to this KVM Switch.
Configuration Diagram
(7 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals